1940s, 1945, pants, sewing, slacks, trousers, vintage, Vintage Community, vintage life, vintage pattern, vintage reproduction, vintage sewing, vintage style

1940s Trousers And The Journey To Get The Right Fit: Toile #2, the wearable version

How much fiddling can a sewist fiddle… before she LOSES HER MIND! I have come to realize that I’m someone who visualizes how something should look in her head and when the thing I’m making doesn’t look exactly like it… I will fiddle with it, until I’m ready to scream. This has been the last two weeks of my trouser adventure. Why, oh why do I do this to myself. I know I’m not alone here. Raise your hand. Come on! Gett’em up!

I raised the waist. I put it back to where it was. I raised the waist. I put it back to where it was. Then I finally talked myself into leaving it where the pattern has it sitting. Why? I’m hight waisted and realized if I put the waist where my current waist is… it will not be flattering. I’m on a weight loss journey and as I do, my waistline will also lower.

I found the pant legs to be way too wide for me. I took 2″ out of the bottom and tapered them up to the knee.

The pattern I chose for this journey is a 1945 Trouser Set B, that I found on Etsy from Eva Dress. I purchased the PDF version of the pattern. The pattern is originally by Vogue (9016), (“Easy to Make”) ‘Slacks with built-up or regulation waist line and choice of long or below-knee length. As the pattern suggests the pattern is incredibly easy to make, how ever you will need to make fit adjustments for the modern figure. I know I have to.

Then…. after more fiddling I was finally happy with the toile. A happy outcome, was I’d lost more weight and the I had to take the toile in. Now happy with it, I cut out the pants. I wasn’t able to make them right away and would wait a week to sew them. Then sew day came…. and I’d clearly lost a few more pounds in the week I waited… because they were slightly too big. I took another inch out to the waist and 2 inches out of the hips and reduced the width of the legs even more.

For the next rendition of these trousers, I am going to use the original pattern. I had to size up from it and now thing the original size will fit me now.

Am I 100% happy with the trousers? Not yet. I’m going to be trying several different styles over the next few months to see what works. It’s my goal to get the perfect fit for the body I have. The next one I am working on is the Loretta shorts. I’m modifying them to be pants. Stay tuned. They will be next.

1940s, 1945, pants, sewing, slacks, trousers, vintage, Vintage Community, vintage life, vintage pattern, vintage reproduction, vintage sewing, vintage style

1940s Trousers And The Journey To Get The Right Fit: Toile #1

Trousers, Pants, Slacks or what ever you wish to call them, have been my nemesis in my later adult years. I haven’t owned a pair in 10+ years and to be honest I swore I was never going to own a pair again. As per my previous post, there are a lot of things I hate about modern pants, including the fit and how short the rise is. I’m a high waisted, curvy girl! That just isn’t going to do. As I have with all of my current wardrobe, it I want it to fit, I have to make it myself. So why have I changed my mind? A few reasons.

  1. I live in Canada and winters get hella cold here. COLD! FREEZING! WINDCHILL! I usually wear thick tights under my dresses and skirts, but the wind still gets up there.
  2. I love the way 1930s/1940s/1950s pants look.
  3. Vintage trousers fit. The waist is where is SHOULD be. I will always need to to resize them, because I don’t have a 26″ waist or 40″ hips, but with all vintage patterns I’ve redrafted, the fit is always spot on, when I do.
  4. I follow quite a few curvy ladies on Instagram who have made their own trousers and they are rocking them! One of the ladies is Bex Huland! She looks incredible in the 1940s trousers she made and it has inspired me!

The pattern I chose for this journey is a 1945 Trouser Set B, that I found on Etsy from Eva Dress. I purchased the PDF version of the pattern. The pattern is originally by Vogue (9016), (“Easy to Make”) ‘Slacks with built-up or regulation waist line and choice of long or below-knee length. As the pattern suggests the pattern is incredibly easy to make, how ever you will need to make fit adjustments for the modern figure. I know I have to.

So, where do we start? With a toile. We always start with a toile. Every thing I sew I make one. I wish I could just sew straight from the original pattern, but that will never happen. Plus, I have some pretty sweet fabric for my first pair of trousers and there is no way in hell, I’m cutting into it until I get the fit right.

Toile #1

There will eventually be more pictures of me wearing toiles. At the moment I have no way of taking those photos.

There are going to be a few toiles, so be prepared! This first one was ok. When I redrafted it, I almost got the measurements right. I was off, ever so slightly. When I did the sit test, I found them a little snug across the front. I don’t want it baggy either, but if I have to sit for a long time, I would like it a bit looser. Also, it will be a bit more flattering on the tummy area. A few other things I need to change is the rise needs to be at least 1 to 2″ higher, I don’t like the side snaps and the legs from the knees down are way too wide. I also hate the front darts. They aren’t flattering and draw too much attention to my belly.

After making several notes, I decided to search Instagram to see who else may have made these trousers and I remembered that Bex had made a similar pair (hers are 1940s). I looked at a few of her posts and voila, she had the exact same fit issues/change ideas I did AND added a back zipper. The back zipper solved the side button issue! With her trousers, she did add pockets. For now I am going to concentrate on fit. At some point down the road, I will work on adding pocket.

Bex also has a couple blog posts about the trousers she made (here) and (here), as well as how she removed the front darts. Please check them out!

I’m going to be doing a separate blog post for each toile I make and a blog post for the finished pair (with actual photos of me wearing them). These next several months are going to be about trousers. I will be trying out different patterns and styles and working on the perfect fit for all! Oh did I mention, I’m also going to be making shorts… that’s going to be a whole other set of blog posts! I hope you will come along for the journey!

1920s, 1930s, 1940s, 1945, 1950s, 1960s, killer kitsch sew-a-long, sew-a-long, sewing, vintage, Vintage Community, vintage life, vintage pattern, vintage reproduction, vintage sewing, vintage style

Vintage Trousers/Pants Sew-a-long!

We are doing another pop-up sew-a-long over in our Killer Kitsch Vintage WIPs Facebook group. https://www.facebook.com/groups/killerkitschvintagewips/  This time around we are doing pants/trousers! We will be starting on August 24th, 2020. There is no deadline to finish, so join us when you can. Please click on the above link to join our group!

The pattern will need to be 1970s and before. It can be an original vintage pattern or vintage reproduction. If you are joining us please tag me on Instagram (@killerkitsch13) and use hashtag #killerkitschsewalong.

Why trousers you ask? For the last two years I’ve been telling myself I would finally take the trouser making adventure, but I always end up talking myself out of it. I haven’t worn pants (always dresses or skirts) in over 10 years and for a few reasons, but the main reason is I hate the way modern pants fit. The waist is too low and the rise too short. I prefer the styles of the 1930s to 1950s for trousers and pants and those are the era’s I will be sticking with. The waist line and rise are perfection. Heck! I’m even making a pair of shorts. The trousers are from 1945 and a pattern I found on the Eva Dress Etsy store. The shorts are the Loretta shorts from Charm Patterns. (You will need to join their Patreon to get the pattern.) I am also going to attempt a 1950s style pedal pushers. Photos are all in the slide show below!

If you are wanting to also get started and are looking to make trousers/pants, please join us!